Banks, J., B. Burnette, H. Kozloski, J. D. Rose, Introduction to SIMAN V and Cinema V, John Wiley, New York (1995).

Banks, J., "Simulation and Related Software," Chapter 13 in Optimization in Industry, (Anna Sciomachen, Ed.) Vol. 3, John Wiley, Rome (1995).

Banks, J., Carson, J. S. and Sy, J. N., Getting Started with GPSS/H, (2nd ed.) Wolverine Software, Annandale, VA (1995).

Banks, J., Carson, J. S. and Nelson, B. L., Discrete-Event System Simulation, (2nd. ed.) Prentice-Hall, Upper Saddle River, NJ, (1996).

Banks, J., Carson, J.S., II, and Goldsman, D., "Discrete-Event Computer Simulation," Handbook of Statistical Methods for Engineers and Physical Scientists, 2nd ed., (H.M. Wadsworth, Ed.), McGraw-Hill, New York, 1998.

Banks, J., "Software for Simulation," in Chapter on "Simulation," by Hank Grant, to appear in APICS Handbook, edited by Jim Greene. Originally appeared as an article in the 1994 Winter Simulation Conference Proceedings

Banks, J. (Ed.) Handbook of Simulation: Principles, Methodology, Advances, Applications, and Practice, John Wiley, New York, 1998.

Banks, J., "Principles of Simulation," Chapter 1, Handbook of Simulation: Principles, Methodology, Advances, Applications, and Practice, John Wiley, New York.

Norman, V. and Banks, J., "Managing the Simulation Project," Chapter 24, Handbook of Simulation: Principles, Methodology, Advances, Applications, and Practice, John Wiley, New York.

Banks, J., "Vendor Survey," Chapter 25, Handbook of Simulation: Principles, Methodology, Advances, Applications, and Practice, John Wiley, New York.

Banks, J., Tayanithi, P. and Manivannan, S., "A Knowledge- Based Simulation Approach to Analyze Interruptions in a Flexible Manufacturing System" Journal of Manufacturing Systems, vol. 11, no. 3, June, 1992.

Banks, J. and Manivannan, S., "Design of a Knowledge Based On-Line Simulation System to Control a Manufacturing Shop Floor," IIE Transactions on Design and Manufacturing, vol. 1, no. 1, August 1992.

Banks, J., "A Knowledge-Based Simulation Approach for Complexity Reduction During Interruption Analysis in a Flexible Manufacturing System," vol. 12, no. 4, July, 1993, Journal of Manufacturing Systems, with S. Manivannan and Piyapan Tayanithi.

Banks, J. and Dai, J., "Simulation Studies of Multiclass Queueing Networks," IIE Transactions, March, 1997.

Banks, J. and Manivannan, S., "Real-Time Control of a Manufacturing Cell Using Knowlege-Based Simulation," Proceedings of the 1991 Winter Simulation Conference, (B. L. Nelson, W. D. Kelton, and G. M. Clark, Eds.) Phoenix, Arizona, December 8 -11, 1991.

Banks, J., "Selecting Simulation Software," Proceedings of the 1991 Winter Simulation Conference, (B. L. Nelson,W. D. Kelton, and G. M. Clark, Eds.) Phoenix, Arizona, December 8-11, 1991.

Banks, J., "Future Environments for Simulation Software," Proceedings of the First IIE Research Conference, (D.A. Mitta, Ed.), Chicago, Illinois, May 20-21, 1992.

Banks, J., "Simulation Languages and Simulators," Proceedings of the 1992 Winter Simulation Conference, (J. Swain, D. Goldsman, J. R. Wilson, and R. C. Crain, Eds.), Arlington, Virginia, December 13-16, 1992.

Banks, J., "Simulation Software," Proceedings of the 1993 Winter Simulation Conference, (G. W. Evans, M. Mollaghasemi, E. C. Russell, W. E. Biles, Eds.) Los Angeles, California, December 12-15, 1993.

Banks, J., "Experiences with Teaching the Simulation of Manufacturing Systems," Proceedings of the 1994 Conference on Simulation in Engineering Education, Tempe, Arizona, January 25-26, 1994 (invited).

Banks, J., "Pitfalls in the Simulation Process," Proceedings: New Directions in Simulation for Manufacturing and Communications, (S. Morito, H. Sakasegawa, K. Yonedo, M. Fushimi, K. Nakano, Eds.) Tokyo, Japan, August 1-2, 1994.

Banks, J., "Simulation Analysis of Re-entrant Queues," Proceedings of the 1994 European Simulation Symposium, Istanbul, Turkey, October 9-12, 1994.

Banks, J., "Software for Simulation," Proceedings of the 1994 Winter Simulation Conference, (J. Tew, S. Manivannan, D. D. Sadowski, A. Seila, Eds.) Orlando, Florida, December 11-14, 1994.

Banks, J. and Quintanilla, F., "Opportunities for Simulation in Amusement Parks," Proceedings of the 1994 Winter Simulation Conference, (J. Tew, S. Manivannan, D. D. Sadowski, A. Seila, Eds.) Orlando, Florida, December 11-14, 1994.

Banks, J., "Software for Simulation," Proceedings of the 1995 Winter Simulation Conference, (C. Alexopoulos, K. Kang, D. Goldsman, W. Lilegdon, Eds.), Washington, D.C., December 3-6, 1995 (Invited).

Banks, J., "Software for Simulation," Proceedings of the 1996 Winter Simulation Conference, (J. Charnes, D. Morrice, J. J. Swain, D. Brunner, Eds.), Coronado, CA, Dec. 8-11, 1996.

Banks, J., "The Future of Simulation Software: A Panel Discussion," Proceedings of the 1997 Winter Simulation Conference, S. Andradottir, B. Nelson, D. Withers, Eds. Atlanta, GA, Dec. 7-10, 1997.

Banks, J., "The Future of Simulation Software: A Panel Discussion," to appear, Proceedings of the 1998 Winter Simulation Conference, D. J. Medeiros, E. Watson, S. Manivannan, J. Carson, Eds., Washington, DC, Dec. 13-16, 1998.

Banks, J., and V. Norman, "Justifying Simulation in Today's Manufacturing Environment," IIE Solutions, November, 1995.

Banks, J., "Semantics of Simulation Software," OR/MS Today, December, 1995.

Banks, J., "Output Analysis Capabilities of Simulation Software," Simulation, Vol. 66, no. 1, pp. 23-30, January, 1996.

Banks, J., "Semantics of Simulation Software," Computer Integrated Manufacture and Engineering, Spring, 1996. (Earlier publication revised by Lionheart Publishing and reprinted.)

Banks, J., "Interpreting Simulation Software Checklists," OR/MS Today, June, 1996.

Banks, Jerry and Randall R. Gibson, "Getting Started in Simulation Modeling," IIE Solutions, November, 1996.

Banks, Jerry, Mark Spearman, and Van Norman, "Second Look at Simulation," OR/MS Today, August, 1996.

Banks, Jerry, Mark Spearman and Van Norman, "Uses of Simulation: Traditional and Non-traditional," Computer Integrated Manufacture and Engineering, Winter, 1997. (Earlier publication revised by Lionheart Publishing and reprinted).

Banks, Jerry and Randall R. Gibson, "Caution: Some Programming Required," IIE Solutions, February, 1997.

Banks, Jerry and Randall R. Gibson, "Selection of Simulation Software," IIE Solutions, May, 1997.

Banks, Jerry and Mark Spearman, "Rethinking Manufacturing Simulation," Integrated Design & Manufacturing, July/August, 1997.

Banks, Jerry and Randall R. Gibson, "Don't Simulate When: Ten Rules for Determining When Simulation Is Not Appropriate," IIE Solutions, September, 1997.

Banks, Jerry, Mark Spearman, and Van Norman,"Simulation: Traditional and Non-traditional," APICS, December, 1997. (Earlier publication revised by PPCHCR Public Relations, Salt Lake City, UT.)

Banks, Jerry and Randall R. Gibson, "Point: Counterpoint: Simulation Input Data: Don't Discount History in Real-world Projects," IIE Solutions, January, 1998.

Banks, Jerry, Randall R. Gibson, and Van B. Norman, "How to Find the Right Simulation Consultant: A practical guide for consumers of simulation service," OR/MS Today, April, 1998.

Rohrer, Matt, and Jerry Banks, "Required Skills of a Simulation Analyst," IIE Solutions, May, 1998.

Banks, Jerry, "Simulation Consultants Thrive in Consulting," IIE Solutions, October, 1998.

Banks, Jerry, "Simulation Tip #1: Involve the Decisionmaker," ASI Newsletter, October, 1998.

Banks, Jerry, and Randall Gibson. "Simulation of Industrial Projects: From Concept to Implementation," IIE Solutions, November, 1998.